Skip to main content

Flow Meters - Elite Flow Control

EFC-MJ Multi Jet Water Meter
Multi-jet meters are very accurate in small sizes and are commonly 
used up to 2inch sizes for residential and small commercial users. Multi-jet meters use multiple ports surrounding an internal chamber to create multiple jets of water against an impeller, whose rotation speed depends on the velocity of water flow.

EFC-SJ Single Jet Water Meter
The single-jet water meter is mainly used as a secondary meter in residential and small industrial applications or for inclusion in beverage machines and similar applications. It’s simple design makes it a product with a competitive price and highly reliable design. Suitable for a variety of metering applications including secondary domestic billing and light industrial use etc.

EFC-M Mechanical Water Meter
This type of water meter can be used for a remote reading transmission system as equipped with a built-in sensor. Measuring the volume of cold (hot) water passing through the pipeline. Water temperature: 0.1℃～40℃ ( 0.1℃～90℃ for hot water meter, max 130℃).

EFC-MAG Electromagnetic Flow Meter
Electromagnetic flow meter is a kind of high precision and high reliability flow meter. It is used to measure the volume flow of conductive liquid and slurry in a closed pipe, and widely used in iron and steel, electric power, petroleum, chemical, coal, metallurgy, mineral, paper, water supply, food, medicine and other industries.

EFC-B-MAG Electromagnetic Flow Meter
EFC-B-MAG battery-powered electromagnetic flowmeter uses internal battery power supply without external power supply. It is suitable for working conditions where the field power grid cannot be reached and the power grid is difficult to lay. It is especially suitable for the monitoring, measurement and settlement of the tap water supply system.

EFC-VX Vortex Flow Meter
Vortex flowmeter is widely used in petroleum, chemical, metallurgical, thermal, textile, paper and other industries to measure and control superheated steam, saturated steam, compressed air and general gases (oxygen, nitrogen, argon, hydrogen, natural gas, gas, etc.) water, liquid and other media.

EFC-LTFM Turbine Flow Meter
LTFM Liquid turbine flow meter is a new generation of turbine flow meter with simple structure, lightness, high precision, good reproducibility, sensitive reaction, convenient installation, maintenance and use. Turbine flow meter is a kind of precision flow measuring instrument, which measures the flow rate and total amount of impurity free and corrosion free liquid.

EFC-ULTRA Ultrasonic Water Meter
Designed for residential area with household metering and billing system, reached the demand of precise measurement and settlement on End-User for water utilities.

Elite Flow Control specialized in Mechanical type Water meter, Rotary Flow meter, Electromagnetic Flow meter, Ultrasonic Flowmeter, Vortex Flow meter, Turbine Flow meter, Fuel Flow meter, Diesel Flow meter, Oil Flow meter, Rotameter, Mechanical Water meter, Digital Flow meter, Pulser sensor for the industrial, residential and commercial sectors. 

Feel free to contact for any queries E-mail: spark@eliteflowcontrol.uk


Comments

Post a Comment

Popular posts from this blog

Rosemount™ 3300 Level Transmitter - Guided Wave Radar | Emerson Solutions | Supplier in UK

  For level and interface measurements, Rosemount 3300 Level Transmitter provides a reliable and cost effective solution for liquid applications. The Rosemount 3300 has no moving parts, needs no calibration, and is virtually unaffected by process conditions. With top down level and interface measurements you are in total control of your level. • Rosemount™ 3301 Level Transmitter - Guided Wave Radar • Rosemount™ 3302 Level Transmitter - Guided Wave Radar Specifications: • Operating Pressure Full vacuum to 580 psi (Full vacuum to 40 bar) • Operating Temperature -40 to 302°F (-40 to 150°C) • Communication Protocol 4-20 mA/HART™, Modbus® • Probe Types Rigid single lead, Segmented single lead, Flexible single lead, Flexible twin lead, Coaxial, PTFE coated probes Features: The Rosemount 3300 can be equipped with a wide range of probes to fit most applications Parts & Accessories: 03300-1655-1003 Rosemount™ 4" SS Centering Disk For Flexible Single/Twin Lead Probe 03300-1655-1002 Rose...
Post a Comment
Read more

Rosemount™ 228 Toroidal Conductivity Sensor | Emerson Solutions | Supplier in UK

The Rosemount 228 Toroidal Conductivity Sensor reliably measures conductivity in highly conductive electrolyte solutions up to 2 S/cm (2,000,000 µS/cm). These conductivity sensors work in dirty and corrosive applications where metal electrode sensors would otherwise fail. A robust sensor design makes the Rosemount 228 conductivity sensor ideal for measuring concentrations of acid, base and salt solutions. Specifications Process Connection-20: 5/8 in. -11 UNC, -21: 3/4 in. MNPT Valve TypeRecommended Valve: 1-1/2 in. full port ball valve Materials of ConstructionWetted Materials: Body Materials either glass-filled PEEK, glass-filled Tefzel™ or unfilled Tefzel; Option -20: EPDM gasket Max. Operating TemperatureSee Product Data Sheet for details. Max. Operating PressureSee Product Data Sheet for details. Features Meet challenging application requirements with a selection of chemical resistant body options including PEEK and Tefzel High vibration tolerance with reinforced internal metal fra...
Post a Comment
Read more

Rosemount™ T1056 Clarity™ II Turbidimeter | Emerson Solutions | Supplier in UK

  The Rosemount T1056 Clarity™ II Turbidimeter measures turbidity in water. Low stray light, high stability, efficient bubble rejection, and a display resolution of 0.001 NTU make this turbidimeter ideal for monitoring the turbidity of filtered drinking water. The turbidimeter can be used in other applications like monitoring wastewater discharges, condensate returns and clarifiers. Specifications: AccuracyAccuracy after calibration at 20.0 NTU: 0-1 NTU: ±2% of reading or ±0.015 NTU, whichever is greater. 0-20 NTU: ±2% of reading. Enclosure RatingPolycarbonate. Type 4X/CSA 4 (IP65) DimensionsOverall 155 X 155 X 131 mm (6.10 X 6.10 X 5.15 in.) Cutout: 1/2 DIN 139mm (5.45 x 5.45 in.) Calibration OptionsUser-prepared turbidity standard, commercially prepared turbidity standard, or grab sample Measurement Range0-200 NTU Resolution0.001 NTU Features: Complete system includes single or dual input transmitter, turbidity sensor(s), debubbler assembly and cable for each sensor ISO METHOD 70...
Post a Comment
Read more